Pietenpol Sky Scout

Air Scout
Role amateur-built airplane
National origin United States
Manufacturer Pietenpol
Designer Bernard Pietenpol
First flight 1933

The Pietenpol Sky Scout is a parasol wing homebuilt aircraft designed by Bernard H. Pietenpol.[1]

Contents

Development

The Sky Scout was a lower cost follow-on to the Pietenpol's first homebuilt design, the Pietenpol Air Camper. Using a lower cost Ford Model T engine, rather than the more current Ford Model A engine of the time. The aircraft was redesigned for the heavier, lower power engine by reducing it to a single person aircraft. The new pilot location required a section called a "flop" to be installed, essentially a section of the wing that was hinged up to allow the pilot to stand up when getting into and out of the aircraft.[2]

The aircraft was designed to be built of spruce and plywood. The drawings were published in the 1933 Mechanix Illustrated magazine.

On display

A Sky Scout is on display at the Pioneer Flight Museum in Kingsbury, Texas.[3]

Variants

Specifications (Pietenpol Sky Scout)

Data from Sport Aviation

General characteristics

Performance

See also

Aircraft of comparable role, configuration and era

Related lists

References

  1. ^ Mechanix Illustrated magazine. 1933. 
  2. ^ Sport Aviation. March 1958. 
  3. ^ "Pietenpol Air Scout". http://pioneerflightmuseum.org/index.shtml. Retrieved 16 April 2011. 
  4. ^ Sport Aviation. February 1960. 

External links